Wo and the source of high-pressure grouting plugging machine:
Features: Wo source of high pressure pouring machine introduction of foreign advanced equipment and technology design and development, humane use of features, easy to carry and portable nature, so as to create special wear-resistant material Kennedy Dayton, excluding conventional perfusion machine, although small, lightweight but extremely damaging rate high, maintenance difficulties, small problems many shortcomings, the company rapid disassembly, easy maintenance and design requirements for the demolition of perfusion sealing, crack mending professional models, with high load power, high-pressure perfusion body parts deformation lightweight construction can be solved by the inconvenience of carrying heavy machinery, is a professional seal leak-proof, the best tool for wall construction fill those cracks.

Scope:
1. Cracks various buildings and underground concrete projects, expansion joints, construction joints, structural joints plugging seal.
2. Geological Drilling Project drilling Wall plugging reinforcement.
3. conservancy and hydropower project reservoir dam grouting, plugging cracks in the tunnel water, seepage, dam seepage reinforced concrete cracks.
4. Subway, tunnel, culverts, sewage treatment pond, round cracks leak water, with water plugging.
5. basements, underground garages, underground passages, concrete cracks leak water, with water plugging.
6. Roof concrete slab crack, wall pipe, wall, leakage of water, with water plugging.
7. Concrete structures, beams, columns, structural cracks board, high-pressure injection of epoxy resin.

Machine features:
Rapid Construction: can improve in a few seconds to 5000PSI working pressure, perfusion time faster than other models.
Light weight: body weight of 7 kg male, carrying a mobile easy maintenance simple: do not need special training to maintenance, repair and eliminating downtime due to mechanical solid and durable: the maximum pressure when the body parts are not deformed 10000PSI
Continuous pressurization: Solvent effective irrigation to deep fine cracks have hives, indeed effectively fill the cracks in the honeycomb structure suitable material: PU foam stanch agents, epoxy resin, no granular low-viscosity liquid

Instruction manual:
Electromechanical infusion unplugged before drilling to confirm switch is everything (closed) state!
When the new machine just to use, please note the lubricating oil poured into the cup machine _ turn on the power cycle times. Body and peripheral equipment lubricant wipe with a soft cloth dampened _ times, the PU foaming agent or epoxy stir poured into the cup, lid tightly. Perfusion-off valve to OPEN pull open state, perfusion machine aligned with the trash mouth butter, turn on the power switch, the remaining oil out of the inner tube to the solvent discharge date, (oil can not adhere to the body and interior equipment solvent in order to avoid congestion, and lubricate
The perfusion butter mouth firmly seated aligned perfusion head righting, first open perfusion switch, then turn on the power switch, the solvent continuous pressurized injection structure in vivo, the solvent from the surface of the spill until the first turn off the power switch, and then close the perfusion switch, the switch valve up and down Outgoing swing loose. Must immediately order special cleaning agent into the machine after the completion of construction within the cup, the remaining solvent out of the tube into the cleaning agent spray up. Perfusion switch is inserted within the cup, the switch valve switch several times in a row, so that the inner wall of a pressure, easy to clean, wash about 3-5 minutes, the inner spray machine cleaner and trash, after spraying and then pour lubricating oil perfusion machine _ Cup cycle times, solvent residue inside the machine maintenance to avoid the wall, leading to clogging.
If only perfusion single liquid PU foaming agent, the next day to continue construction, leaving half cup of some or solvents, tightly closed lid, butter mouth with a needle seated, when the next day using the inner cup surface hardening film material that is cleaned can be used for several days if not used, must be cleaned and maintenance.

Output pressure: 11000PSI perfusion machine standard configuration
Start again: <7500PSI 1: Body 1 table 5: a high-performance drive motors
Drive motor: 220V / 700W / 50HZ 2: the cup a 6: 1 set Repair Kit
Maximum particle: 0-2mm 3: high-pressure pipe 1 7: Filter 1
Body weight: 7KG 4: switching valve _ support (including butter head)